TRX-4M® Bronco Pro Scale™ Light Set (Fits TRA9711 Body)

Add scale lighting to your 1/18 scale TRX-4M Bronco for an extra layer of fun and good looks. The Pro Scale Lighting Kit adds working headlights, tail lights, brake lights, and hazard lights that respond precisely to your inputs. Installation is quick and easy because the programming is already built into the ECM-2.5™. Just install the lights in the body and plug a single wire—that’s all there is to it! Pro Scale lights are built to handle all weather conditions with fully waterproof construction. Pro Scale lighting functionality is already built into the ECM-2.5 so there's no need to install extra modules. Just plug the wiring harness into one the light channels on the ECM and you're ready for fun. You can even use the standard bumper lights in addition to Pro Scale lighting for an extra boost of power. A new point-to-point LED wiring bus makes installation as simple and clean as possible with a single length of wire running the entire system.Features:

• Fully waterproof
• Single wiring harness connection to ECM-2.5™ for simple installation
• 5 Lighting Modes; selectable using the EZ-Set® Button
  Headlights
  Marker/Daytime Running Lights
  Lights Off (Brake and Reverse Lights only)
  Hazard Lights
  Demo Mode* (plays a cycle of lighting functions) *For display only; TRX-4M will not drive in this mode
• Headlights
• Daytime running lights
• Functional brake lights
• Functional reverse lights
• Hazard lights
• Kit Includes: LED lighting kit harness

Includes:

• (1) Light Harness
• (2) 1.6x10mm Buttonhead Cap Screws (Self-Tapping)
• (2) 1.6x7mm Buttonhead Cap Screws (Self-Tapping)
• (2) Zip Ties

Accessory Part For:

• 1/18 Ford® Bronco® (Model# 97074-1)