PRD Clutch Bearing

Product Specs:

• PRD Fireball Clutch Drum Needle Cage Roller Bearings.
• These are for the new 2013 and later PRD Fireball engines with the 12mm crank shaft.
• If you have the older, larger 14mm shaft - these will not work for you. 
• An easy way to identify your crank shaft size (without measuring it) is to look to see if the clutch is held on with both a nut and snap ring. 
• If a snap ring is present, then you have the newer 12mm shaft. 
• If the outer clutch is held on with just a nut, and there is no snap ring present, then you have the older 14mm shaft. 

• Pair of 10mm wide (use two per sprocket) 
• One 20mm wide (use one per sprocket)
• When you select the 10mm size, we send you two bearings. 
• When you select the 20mm wide bearing, we only send one bearing.