TrailMaster Taurus 400 UTV

TrailMaster Taurus 400 UTV

Part Number:TMU400
Availability:In Stock
Location: Drop Ship ;
Free Shipping
0/5 stars
Your Price:
On sale$6,195.00
Retail Price:$6,995.00
Your Savings:$800.00(11%)

Choose Options

Product Specs
  • Linhai 352cc SOHC Liquid Cooled Engine
  • Torque Converter
  • Hydraulic Disc Brake
  • McPherson Front Suspension: Wheel Size: Front 25x8x12, Rear 25x10x12
  • Utility Rack
  • Length x Width x Height(in): 105.6'' x 57.5'' x 74.4''
  • Wheelbase: 71''
  • Weight: 1138 lb
  • Front Tires: AT 25x8-12
  • Rear Tires: AT 25x10-12
  • Front Brakes: Bilateral hydraulic disc
  • Rear Brakes: Bilateral hydraulic disc
  • Suspension type Front: McPherson independent suspension Rear: Twin-A arm independent suspension
  • Model: One cylinder,4 stroke, water-cool, SOHC
  • Cylinder diameter X trip,mm: 80x70
  • Cylinder dimension,ml: 352
  • Demarcate power and corresponding REV,kW/r/min: 17/6500
  • Max torque and corresponding REV,Nm/r/min: 27/5500
  • The lowest rate of fuel consume consumption,g/kW.h: 340
  • The minimum rev of no-load stability,r/min: 1500/150
  • Compression Ratio: 9.8:1
  • Inition type: TCI
  • Start type: Electric start
  • Battery: 12V 14Ah
  • Headlamp: 12V 35W/35W x 2
  • Break lights/Tail lights: 12V 21W/5W x2
  • Turning light: 12V 10W x4
  • Meter lights: 5 LED
  • High beam indicator light: 5 LED
  • Battery: 12V 3A

Assembly Info: Here is a basic breakdown of what you can expect on the assembly. When you get this kart it will be unassembled in a crate.

  1. Take the unit out of the crate and sort out the parts.
  2. Put on the front and rear tires
  3. .Put on the roll cage.
  4. Install the seats.
  5. Install the steering wheel.
  6. Put in the Battery.
  7. Check all your bolts and gas up your unit.
  8. Start your unit!
  9. Assembly Time 4 - 6 Hours
Note: The actual assembly may vary, and it is always best to have a Certified Mechanic assemble your unit.
Please remember that by purchasing a vehicle from us, you are making a Factory Direct purchase and you are responsible for performing the final assembly and setup that a store or local dealer would normally perform.

Assembly typically includes un-crating and installing/checking the wheels, seats, roll bars, hooking up the fuel line, battery and lights, checking tightness of all nuts and bolts, changing oil, etc. Although we do provide some general information and Setup Guides on our website, occasionally some units may need other routine items checked/adjusted such as cleaning and adjusting the carburetor and fuel tank, checking to ensure wires are well connected, adjusting chain slack and alignment, if needed.

Since you are skipping a dealer and saving over half the price of a usual retail customer, you will need to perform the final assembly (as stated above). This will take generally 4-6 hours or more to perform depending on your product and skill level. We STRONGLY RECOMMEND that a Qualified Mechanic perform the setup of your product. We cannot refund or exchange your unit if you cannot perform these functions. By placing an order with BMI Karts you agree to these terms

Residential and Lift-Gate fees may increase shipping cost.

Related Items

Recently Viewed Items