This sprocket was manufactured with two flaws, but is still will work on many go-karts or mini-bikes.
Defects:
- Teeth were cut short (see alternate picture), the pitch (#40) is correct and will work with #40 chain.
- Bolt holes are drilled with very little tolerance (may need reamed out to work with your hub)
No returns available for this product!
Product Specs:
- Chain Pitch: #40 (only)
- Teeth: 60
- Bolt Circle: 2-13/16"
- Bolt Holes: 5/16" (4)
- 1-5/8" Center ID
- 9-5/8" OD
