Pro Seal PRO WELD Cold Welding Compound (2 oz)| BMI Karts And Parts

Home > Go Kart Parts > Pro Seal PRO WELD Cold Welding Compound (2 oz)

Pro Seal PRO WELD Cold Welding Compound (2 oz)

Part Number:ST_751-546

Availability:In Stock

Location: ;

0 Review(s)

0/5 stars

Your Price: $9.95

Quantity

Description
Customer Reviews

Pacer Technology’s Pro Seal PRO WELD Cold Welding Compound is a two-part epoxy adhesive system that is formulated to resist temperatures up to 3000 F and withstand drilling, machining or sanding. Typical applications include the repair of cracks in transmission and rear end casings, manifolds, radiator seams, casting defects and keyways.

Chemical Base

Epoxy resin: Dark Gray or Black paste
Epoxy hardener: Gray paste
Mix Ratio 1:1 mix of equal parts

PROPERTIES - MIXED PRODUCT

Pot Life 15 Minutes
Fixture Time 60 Minutes
Full Cure 12 - 24 hours
Maximum Gap .25"
Tensile Strength, ASTM D638 2500 psi (± 10%)
Tensile Shear Strength ASTM D 1002, Steel/Steel 1100 psi (± 10%)
Service Temperature Range -650 F to +2500 F (-540 C to +1210 C)
Hardness, Shore D 45 (After curing 60 minutes) and 80 (After full cure)

USE INSTRUCTIONS

Surfaces should be clean and dry, free from oil and grease.
Roughen surfaces with emery cloth or sandpaper for best results. Remove all residual dust.
Mix equal amounts of resin and hardener thoroughly, for approximately 1 minute.
Apply to both surfaces and mate parts together.
Remove excess epoxy immediately with denatured alcohol.
Fixtures in 60 minutes, full cure in 12 to 24 hours.