Mychron CHT - Cylinder Head Thermocouple Cable

Binder Connector | CHT ID: 10mm or 14mm

Aim instruments can measure and record cylinder head temperature using a sensor (thermocouple) positioned under the spark plug. The thermocouple presents a turn in the lower part to make installation and disinstallation easier.

• MyChron 3, 4 and 5 all use the same RPM and temp sensors
• CHT Sensor ID =  10mm or 14mm
• Binder
  Length: 55" (1.4m)
  Connector: 712 3-pin (male)