LandStar LS677EFI 4WD UTV

LandStar LS677EFI 4WD UTV

Part Number:LS677EFI
Availability:In Stock
Location: ;
0/5 stars
Your Price: $7,739.00
Retail Price:$8,599.00
Your Savings:$860.00(10%)

Choose Options

Bed Options
Black / Silver Rims with Wheels [$709.00]
Black / Red Rims with Wheels [$709.00]
Winch [$279.00]
Plow Kit [$599.00]
Front Reciever Hitch Kit [$89.00]
Front Hood Rack Kit [$279.00]
Swing Door Enclosure [$999.00]
Dual Gun Rack [$209.00]
Skid Plate Kit [$169.00]
LED Light Bar [$95.00]
Side Mirrors [$49.00]
Hifonics Thor Bluetooth Soundbar [$489.00]
JBL Speaker [$180.00]

ALERT ***This is a non-stock item, and must be shipped to BMI (part of our vendor agreement). Call ahead for lead times. ***

There’s no such thing as too much power in a UTV. There’s also no such thing as too low maintenance. That’s where the LandStar 677EFI comes in. You’ll be surprised by how much functional power you can put to use in the woods or on the farm, you’ll be even more surprised by the value.

The torque of the 694cc Kohler EFI engine, the largest we offer, will impress with its ability to maximize performance by automatically compensating for environmental and demand requirements. The easy-to-maintain air-cooled engine platform will impress your wallet. Put it to the test, if you think you can.

Engine Specs

  • MOTOR 694cc LandMAXX EFI Commercial Power Engine by Kohler Command Pro® CH640 rated at 20.5hp 4-stroke OHV V-twin with oil pressure warning light.
  • SPEED Up to 24 mph
  • FUEL CONSUMPTION Up to 18 mpg
  • RANGE Up to 90 miles
  • STARTING 12v keyed ignition
  • BATTERY 12v / 360 cca utility class
  • FUEL CAPACTIY 5.0 gal
  • ALTERNATOR 25 amp

Transmission Specs

  • TRANSMISSION CVT automatic
  • TRANSAXLE Gear drive Schafer / DANA oil-filled transaxle
  • DRIVE Switch engaged on demand, 4 wheel drive

Suspension Specs

  • FRONT 4-link double A-arm with up to 3" travel
  • REAR Articulated rear swing arm, twin adjustable

Brake System

  • FRONT Hydraulic disc
  • REAR Hydraulic drum rear
  • PARKING BRAKE Hydraulic drum rear

Tire Specs

  • FRONT 25 x 8 - 12
  • REAR 25 x 10 - 12


  • DIMENSIONS 110" L x 49" W x 78" D
  • WHEEL BASE 73.5"
  • TURNING RADIUS 9.5' inside radius
  • DRY WEIGHT 1,010 lbs.
  • SHIPPING WEIGHT 1,195 lbs.

Bed Specs

  • MATERIAL Structural foam "Poly Bed" with stake pockets
  • DIMENSIONS 35.25" L x 41.5" W x 11" D

Capacity Specs

  • BED CAPACTIY 9.25 cu. ft. / 500 lbs.
  • TOWING CAPACITY 1,200 lbs.
  • VEHICLE CAPACITY 1,000 lbs.

In-Store Purchase: Not available in store.

Note: The actual assembly may vary, and it is always best to have a Certified Mechanic assemble your unit.
Please remember that by purchasing a vehicle from us, you are making a Factory Direct purchase and you are responsible for performing the final assembly and setup that a store or local dealer would normally perform.

Assembly typically includes un-crating and installing/checking the wheels, seats, roll bars, hooking up the fuel line, battery and lights, checking tightness of all nuts and bolts, changing oil, etc. Although we do provide some general information and Setup Guides on our website, occasionally some units may need other routine items checked/adjusted such as cleaning and adjusting the carburetor and fuel tank, checking to ensure wires are well connected, adjusting chain slack and alignment, if needed.

Since you are skipping a dealer and saving over half the price of a usual retail customer, you will need to perform the final assembly (as stated above). This will take generally 4-6 hours or more to perform depending on your product and skill level. We STRONGLY RECOMMEND that a Qualified Mechanic perform the setup of your product. We cannot refund or exchange your unit if you cannot perform these functions. By placing an order with BMI Karts you agree to these terms

Residential and Lift-Gate fees may increase shipping cost.

Related Items

Recently Viewed Items