Inferno Fire 3/4" Clutch from Hilliard

Bore: 3/4" | Teeth: 11-22T | Pitch #35

• The FIRE has a bonded high performance friction lining that makes a smooth transition from the slip you need for optimal acceleration off the corners.
  
• The clutch includes a special oil & grease shield to keep contamination off of the shoe surface.
  
• Brand new heat treated sprocket to accept the needle bearing.
  
• The needle bearing helps the kart roll easier through the corners and a better release of the clutch entering the corner.
  
• All of these upgrades improve acceleration off the corner and reduce the push through the corners.
  
• Upgraded the inner race with a material change and heat treatment so you can get optimal performance and long life.
  
• Clutches will come standard with the mounting hardware and correct spacers to quickly mount to your LO206.
  
• The hardened race and spacers that come with the clutch will clamp the clutch tight to the crankshaft to minimize fretting.
  
• The high performance friction lining is cleaned with brake cleaner so maintenance is a breeze.
  

Product Specs:

• 3/4" Bore
  
• Tune-able
  
• Includes (4) White Springs & (4) Black Springs
  
• Sprocket Options: #35 or #219 chain
  
• Implements shoes with removable weights to fine tune track performance.
  
• Optional weight and spring combinations offer infinite tuning possibilities.

*11T #35 DRIVE SPROCKET HAS NO BEARING, BUT DOES REQUIRE INFERNO STYLE RACE