BMI KARTS AND Event Center LOGO
Home > Go Kart Parts > Go Kart Engines and Components  >  Improved Spring Set (Red, Green, or Yellow)
Improved Spring Set (Red, Green, or Yellow)
Improved Spring Set (Red, Green, or Yellow)

Improved Spring Set (Red, Green, or Yellow)
for 196cc 6.5 HP Clone / GX200 Engine

Part Number:ADJ-1055I, ADJ-1055Y, ADJ-1055HD
Manufacturer's Part Number:DJ-1055
Availability:In Stock
Location: 0400.04.03, SR.1.B.5 ;
review
10 Review(s)
5/5 stars
Your Price: $8.50

Choose Options

Style
Green Stripe Spring Set
  • Springs processed to reduce the amount of spring pressure loss from running in the engine.
  • Only lose between 0.2-0.6 lbs of pressure verses 0.8 - 1.2 lbs in other springs.
  • This will allow the engine to run a higher RPM before experiencing uncontrolled valve float.
  • Pre-Set option checked to meet AKRA Tech guidelines
  • Spring Pressure:
    10.6-10.8 lbs @ .850"
    17.8-18.0 lbs @ .650"
Yellow Stripe Spring Set
  • Stronger than the Green Stripe spring, and slightly more durable than the Red Stripe spring.
  • These springs on average will lose less than .2 lbs of spring pressure over the course of 4-5 races in a typical AKRA/NKA prepped engine and has become a preferred spring for builders.
  • The Yellow Stripe spring is one of the best "All Around" springs on the market. This spring must be checked/set to meet AKRA or NKA rule requirements, they may not pass tech out of the pack.
Red Stripe Spring Set
  • Strongest 10.8 lb spring on the market. 
  • This Heavy Duty spring will allow the engine builder to custom fit their spring to their particular build. Having been through a specific process, which will reduce the amount of spring pressure loss from running in the engine, this spring will allow the engine to run a higher RPM before experiencing uncontrolled valve float.
  • This spring is considered a "Builders Spring" and will not test legal without being set.
  • Springs should be checked prior to installation to insure they meet rule requirements.
  • Spring Pressure:
    11-11.5lb @ .850"
    19-19.5lb @ .650"

View All Reviews
5 Stars
Sir
I run these springs on two engines that have governors removed and stage one modifications. They work well. Anything heavier is overkill and not needed. Plus, for $8.50 what's not to like? If your engine is not a crazy build then these will do just fine.
Did you find this helpful? 
Reviewed by:  on 7/4/2021
5/5
5 Stars
Did you find this helpful? 
Reviewed by:  on 4/23/2019
5/5
5 Stars
Did you find this helpful? 
Reviewed by:  on 4/23/2019
5/5
5 Stars
Did you find this helpful? 
Reviewed by:  on 4/23/2019
5/5
5 Stars
Did you find this helpful? 
Reviewed by:  on 11/8/2023
5/5

Related Items

Back Spring
Back Spring
for Honda GX390, 13HP Clone, Predator 420cc
Average Rating(6)
2.35
(JD800216) | In Stock
Replacement Gasket without Asbestos for Reduction Case for Honda GX120, GX160, & GX200
Replacement Gasket without Asbestos for Reduction Case for Honda GX120, GX160, & GX200
Average Rating(7)
3.95
(AT1105-HD200-20) |
Air Filter for Honda Generator with GX120, GX160, or GX200 Engine
Air Filter for Honda Generator with GX120, GX160, or GX200 Engine
Average Rating(6)
2.95
(AT802-HD200-02) | In Stock
Briggs Animal Side Cover Gaskets
Briggs Animal Side Cover Gaskets
Average Rating(6)
10.95
(PL27500) | In Stock
Yamaha Cable Anchor Housing
Yamaha Cable Anchor Housing
Average Rating(7)
18.95
(GPG1360) | In Stock
Fuel Pump Bracket
Fuel Pump Bracket
for Honda GX200, 196cc Clone or Ducar 212cc
Average Rating(1)
16.95
(DY212-FPB) | In Stock

Recently Viewed Items