Hydraulic Brake Kit

Mid-Sized Kart | Complete Set-Up

A: This caliper will work with 4mm (~1/8") width rotors. Here is a few rotors that are compatible. Answer provided by:  BMI Karts (3/7/2016)

A: The brake caliper will be mounted near the rear axle, while the rotor will be mounted directly to the rear axle centered between the caliper pads. Answer provided by:  BMI Karts (3/9/2016)

A: The caliper is pre-drilled to mount to a frame, but does not include a separate bracket. We currently do not offer a bracket or pedal specifically designed for this brake system. Answer provided by:  BMI Karts (3/17/2016)

A: A fabricated bracket or plate will need to be made to mount master cylinder to the frame. The zinc bracket facilitates the amount of travel for the piston / pedal. The brake line is 66" long.
Answer provided by:  Chad (5/9/2016)

A: Sorry, it does not include any installation instructions. Answer provided by:  BMI Karts (6/20/2016)

A: Unfortunately we do not have any information that this is a bolt on replacement for the Black Widow. However, since the Black Widow is an imported kart vary similar to other manufactures, such as Hammerhead, Twister and Trailmaster it is very likely it is compatible, or can be installed with limited alterations. Answer provided by:  BMI Karts (6/21/2016)