Truck Talgo Mount Coupler for Early Tyco Metal Trucks & Craftsman Kits
Metal Coupler with insulated Draft Gear Box and Lid, bronze Centering Spring and side and smaller center screw mounting hole used for truck mounting situations, similar to NO.5® Coupler.
It is not recommended to use a metal coupler directly on a metal surface or in a metal draft gearbox to avoid possible electrical crossover and shorting that may cause damage.
Two pair per package
Package Includes:
Material €“ Metal
Shank Length €“ Medium (9/32'') (center hole to back of coupler head)
Coupler Offset €“ Centerset
Knuckle Spring €“ #622
Centering System €“ Standard Shank
Centering Spring €“ #634 Centering Spring NO.5® Style
Head €“ Standard Head
Material €“ Insulated Plastic
Dimensions €“ 29/64''L x 19/64''W x 7/64''H
Mounting Height top of gearbox €“ 29/64''
Mounting Height bottom of gearbox €“ 21/64''
Centerline €“ 25/64''
Trip Pin Height €“ 1/32''
Center Hole €“ 0-48 Self-Tapping are the most commonly used. (Screw length will vary)
Side Holes €“ 0-48 Self-Tapping or 0-80 Machine Screws. (Screw length will vary)
