Go Kart Chain Replacement

Removal

• 1. Remove the guards covering the drive components.
• 2. Rotate the drive wheel to place the master link (3) in an accessible position between the two sprockets.
• 3. Slide the retaining clip (1) of the master link (3) until the reliefs are centered over the link pins.
  Remove the clip and side plate (2).
• 4. Slide the master link out and remove the chain.

Installation

• 1. Install new chain.
• 2. Slide the pin portion of the master link (3) in to each end of the chain to be connected.
• 3. Slide the side plate (2) portion of the master link on to the pins.
• 4. Slide the retaining clip (1) on to the pins until the clip snaps securely in to place.

Caution: The master link should be installed with the open end of the retaining clip (1) facing away from the direction of the chain rotation (4).