Dyno Cams CL4 Grind Cam for 212cc OHV Predator

Dyno Cams CL4 Grind Cam for 212cc OHV Predator

Part Number:CL-4
Manufacturer's Part Number:Dyno Cams CL4
Availability:In Stock
Location: 6520.10, ;
review
0/5 stars
Your Price: $44.95
The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over our current CL3. This cam comes buffed, further smoothing the nose, to take max advantage of the 10.8 springs. The lobes are hardened for extra durability, extending the life of this cam.

The CL4 is not legal for AKRA.

Product Specs:
  • Engine: 212cc Hemi Predator
  • Recommended Class: Unrestricted Stock Classes
  • Target (MAX) RPM: 6900-7100
  • Spring Pressure (In / Ex): 10.8 lbs
  • Valve Lash (In/Ex): .001"
  • Ignition Timing: 34-36 Deg BTDC
SAFETY NOTICE:
  • Use this racing camshaft with stock valve springs ONLY and the "weiner" type exhaust header with an max. inside diameter of .635 for safety reasons. If after market racing springs and/ or unrestricted exhaust system is installed a BILLET FLYWHEEL IS MANDATORY!

Grind Number : New CL-4
Recommended Class: Stock

Valve Timing
IntakeExhaust
Open28.75 BTDC66.25 BBDC
Close 75.25 ABDC41.75 ATDC
Lift.2245.231
C/L114.0 ATDC103.5 BTDC
Valve Lash.003.003
Check lash when engine is cold
Other Specs


Recommended Ignition Timing: 31-32 Degrees

Related Items

Recently Viewed Items