Dyno Cams CL4 Grind Cam for 196cc OHV Clone

Home > Go Kart Parts > Go Kart Engines and Components > Dyno Cams CL4 Grind Cam for 196cc OHV Clone

Part Number:CL-4

Manufacturer's Part Number:Dyno Cams CL4

Availability:In Stock

Location: 0300.16.04, ;

4 Review(s)

5/5 stars

Your Price: $47.95

Quantity

Description
Customer Reviews
Recommended Products

The CL4 is specifically designed for the NKA rule package. With no minimum duration requirements, we were able to smooth the nose of the cam allowing it to rev well into the 7000 RPM range. The CL4 shows gains in the 6600 RPM range over our current CL3. This cam comes buffed, further smoothing the nose, to take max advantage of the 10.8 springs. The lobes are hardened for extra durability, extending the life of this cam.

The CL4 is not legal for AKRA.

Product Specs:

Engine: 212cc Hemi Predator
Recommended Class: Unrestricted Stock Classes
Target (MAX) RPM: 6900-7100
Spring Pressure (In / Ex): 10.8 lbs
Valve Lash (In/Ex): .001"
Ignition Timing: 34-36 Deg BTDC

SAFETY NOTICE:

Use this racing camshaft with stock valve springs ONLY and the "weiner" type exhaust header with an max. inside diameter of .635 for safety reasons. If after market racing springs and/ or unrestricted exhaust system is installed a BILLET FLYWHEEL IS MANDATORY!

Grind Number : New CL-4
Recommended Class: Stock

Valve Timing
	Intake	Exhaust
Open	28.75 BTDC	66.25 BBDC
Close	75.25 ABDC	41.75 ATDC
Lift	.2245	.231
C/L	114.0 ATDC	103.5 BTDC

Valve Lash	.003	.003
Check lash when engine is cold
Other Specs
Recommended Ignition Timing: 31-32 Degrees