Dyno Cams CL2 Grind, Retarded 2 Degrees for Clone 6.5HP or GX200

Designed in 2013, the intake and exhaust lobes allow the CL-2 to run at higher RPMs before the engine goes into uncontrolled valve float. By retarding the cam 2 degrees the power band is shifted around 200rpm, giving the cam more top end. The DynoCams CL2-R2 is legal for the current profile rules for stock classes. The lobes are hardened for extra durability, extending the life of this cam.

Product Specs:

• Engine:196cc OHV Clone, 212cc Hemi Predator
• Recommended Class: All Stock Classes
• Target (MAX) RPM: 6200-6700
• Spring Pressure (In / Ex): 10.8 lbs
• Valve Lash (In/Ex): .003"
• Ignition Timing: 32 Deg BTDC
• Max. pipe ID .635 for safety
  

Grind Number : New CL-2 R2
Recommended Class: Stock
Valve Timing
	Intake	Exhaust
Open	26.7 BTDC	64.9 BBDC
Close	75.0 ABDC	38.8 ATDC
Lift	.2245	.2305
C/L	114.0 ATDC	103.5 BTDC
Valve Lash	.003	.003
Check lash when engine is cold
Other Specs
Recommended Ignition Timing: 31-32 Degrees