Dyno Cams CL-3 Low Duration

For 196cc Clone or Predator 212cc (Hemi)

The CL3 utilizes the -5 duration check, in the AKRA rule package, by allowing a softer ramp rate on the nose of the cam. This design has shown gains in the 6200+ RPM range with minimal loss in peak horsepower. The DynoCams CL3 is legal for the current profile rules for stock classes. The lobes are hardened for extra durability, extending the life of this cam.

Product Specs:

• Engine: 196cc OHV Clone
• Recommended Class: Unrestricted Stock Classes
• Target (MAX) RPM: 6400-6900
• Spring Pressure (In / Ex): 10.8 lbs
• Valve Lash (In/Ex): .003"
• Ignition Timing: 32 Deg BTD

SAFETY NOTICE:

• Use this racing camshaft with stock valve springs ONLY and the "weiner" type exhaust header with an max. inside diameter of .635 for safety reasons. If after market racing springs and/ or unrestricted exhaust system is installed a BILLET FLYWHEEL IS MANDATORY!

Grind Number : New CL-3
Recommended Class: Stock
Valve Timing
	Intake	Exhaust
Open	29.15 BTDC	65.95 BBDC
Close	75.58 ABDC	41.55 ATDC
Lift	.2245	.231
C/L	114.0 ATDC	103.5 BTDC
Valve Lash	.003	.003
Check lash when engine is cold
Other Specs
Recommended Ignition Timing: 31-32 Degrees