Comet TAV2 30 Series Torque Converter

Comet TAV Torque-A-Verter Converter - Made in USA

This is an asymmetrical type torque converter system which means the sheave faces are non-symmetrical. They have different angles. In this case, the moveable sheave face is 18° while the stationary sheave face is 2-1/2° for a collective angle of 20-1/2°. Here are some reasons for selecting the asymmetrical concept. The Torque-A-Verter can attain an .90:1 or 10% overdrive.

Specifications:

• Cast Aluminum Backplate
• 6" OD Driven
• Drive Clutch Engagement: 2200 RPM
• Drive Belt: 3/4" Top Width - Asymmetrical
• Drive Clutch Bore: 3/4" (3/16 Key) or 1" (1/4 Key)
• HP: Up to 8 HP (2 Cycle / 4 Cycle)
• Sprocket: #35 (12T) or #41 (10T)
• Bolt Pattern to Mount to Engine: (4) 5/16" holes on a 3-5/8" bolt circle, and (4) 5/16" holes on a 5" bolt circle.

Owner's Manual:

Engine compatibility: It is compatible on most small engines with horizontal shaft.

Note: A gusset (fin) on the backplate may need notched to mount flush!

• Predator 212cc
  
• Briggs
• Robin
• Tecumseh
• Honda (and clones)
• Kohler
• Clinton
• Lifan