Comet dry-film lubricant is great for your Torque Converter Driver and Driven units.
Extend the life of your equipment merely by regularly freeing it of belt residue & belt dust. Don't let your equipment get "all gummed up" or excessive parts wear will result.
Comet GP-730A is a dry-film lubricant that bonds to the surface being sprayed within one to two minutes or less in normal air-drying conditions.
GP-730A contains a high percentage of micro-fine metallic additive (MoS2) with excellent lubricating capabilities suspended in a unique bonding agent. GP-730A will not "dust away" or dislodge and bonding occurs without heating or baking.
Even under sliding pressure GP-730A actually bonds to most ferrous and non-ferrous metals as well as to plastics, fibrous, wood, glass, rubber and many other friction surfaces.
GP-730A performs well even under heavy load and extreme pressure. It greatly enhances effectiveness of normal lubricants applied over it. GP-730A is non-corrosive, inert to water, oil and many acids, solvents and alkalis.
GP-730A contains no oil, grease, wax or silicone; it will not attract dust or dirt. GP-730A greatly lowers metal-to-metal contact and thus reduces power consumption and torque-loss.
NOTE: Avoid getting GP-730A on the belt or sheave surfaces and is not suitable as a roller chain lubricant.
