Cast Iron Pillow Block with 3/4" Bearing

High quality light duty 3/4" pillow block bearing. The bearing has two set screws for attaching to the shaft. Housing is cast iron with a grease zerk for re-lubing the bearing.

Condition: These pillow blocks may have some surface rust or could be dirty and dusty from storage, but are new.

Basic Dimensions:

• Shaft Size: 3/4"
  
• Shaft Height: 1.31"
  
• Bolt Hole Center to Center: 3.70" 
  
• Overall Length: 4.990"
  
• Overall Height: 2.56"
• Width of Base: 1-1/2"
  
• UC204-12 stamped on bearing
• Also referenced as UCP204-12