Caliper Bracket for MCP Calipers with 7.1" Rotor

This caliper bracket is for the MCP-1375 Lightweight Caliper with 7.1" rotor. It fits standard rear axle cassette with 3/8" - 16 bolt hole pattern.

Product Specs:

• These only work with 1-1/4" bearing hangers
• Works with following calipers:
  
• MCP Cast Alum. Hydraulic Brake Caliper (Single Line) - #600512
  
• MCP Cast Alum. Hydraulic Brake Caliper - #600508
  
• MCP Billet Hydraulic Brake Caliper - #600504
  
• MCP Billet Hydraulic Brake Caliper (Single Line) - #600600