AiM GPS09B Receiver for SmartyCam HD

2m or 4m

The GPS09B Module connects to the AiM SmartyCam HD Video Camera (sold separately) via a 4-pin 712 screw-in connector to provide GPS data such as speed, position, acceleration, and lap timing. This information can be overlaid directly on the video image as it records -- no hassles trying to sync the data to the video afterwards!

The GPS09B is only used with the SmartyCam HD, SmartyCam HD 2,1, or SmartyCam GP HD.

• It will not connect to the original SmartyCam, SmartyCam HD GP 2.2, or to any other AiM data logger or dash.
• The GPS09B is not needed if the SmartyCam HD is connected to an AiM logger with built-in GPS (MyChron5, SoloDL/Solo2DL, MXm), or to a dash or logger with a GPS module already connected (MyChron4, MX-Series, or EVO Series with GPS).SmartyCam HD GP 2.2 uses the same GPS09 Module (Part No. MC-751) that AiM dashes use.