4 x 4 Wheel Hub (5/8" ID Bearing)

White Powdered Painted / 4" Bolt Circle

A: No, this hub arrives to us with bearings already pressed in. Answer provided by:  BMI Karts (2/29/2016)

A: It is actually 1" on one side and 1-1/2" on the other. We added an additional image to help illustrate this. Answer provided by:  BMI Karts (3/15/2016)

A: That is called a dual-flanged hub, and no we currently do not have any with a 4x4 pattern (only 2-13/16). Answer provided by:  BMI Karts (3/22/2016)

A: From pictures found on the web, this hub will be to large for the stock front rim on KenBar Streaker D690. This hub has a 4x4 (Four 1/2" lugs on a 4" bolt circle), usually used on 18" or taller tires. It appears the Streaker has a much smaller (~15" front tire), and may use a 2-13/16" bolt circle, similar to this wheel hub. However you would have to measure to make make sure.
Answer provided by:  BMI Karts (3/28/2016)

A: You will have to check your wheel bolt pattern and ensure it is a (4) 1/2" Bolts on a 4" Bolt Circle. This hub 4 x 4 Galvanized Wheel Hub (Front with 5/8" Bearing), can be installed with a 3/4" bearing instead. Please contact us for before ordering. Answer provided by:  BMI Karts (4/13/2016)