Standard equipment for the 5000; 10" Tabletop Mill includes:
- A powerful 90V DC motor with electronic speed controller
- 10 in. base
- Standard 1-5/8" (41mm) handwheels on the X- and Y-axes, and one 2-1/2" (63mm) with thrust bearings on the Z-axis. Each handwheel has laser-engraved aluminum handwheel collars
- 2.75" (70 mm) x 13.0" (330 mm) table with two T-slots
- Pulleys, drive belt, three hexagonal keys, spindle bars, gib removal tool, eight-foot three-wire power cord, and instruction manual
- Oil reservoirs on the X/Y axes and the Z axis help keep critical parts lubricated. These were initially developed for CNC machines that run constantly for hours on end but can benefit manual machines as well
- Brass leadscrew cover that keeps chips off the rear of the Y-axis leadscrew
Specifications:
- Max clearance (table to spindle): 8.00" (203 mm)
- Throat (no spacer): Optional
- Throat (w/ headstock spacer): Adjustable
- Travel, "X" Axis: 8.65" (220 mm)
- Travel, "Y" Axis: 3.00" (76 mm)
- Travel, "Z" Axis: 6.25" (159 mm)
- Hole through spindle: .405" (10 mm)
- Spindle nose thread: 3/4"-16 T.P.I.
- Spindle nose taper: #1 Morse
- Spindle runout of Morse taper: .0005" or less
- Handwheel graduations: .001" (.01 mm)
- Electronically controlled spindle speed range: 70 to 2800 RPM
- Width Overall*: 14.75" (375 mm)
- Depth Overall*:
Base footprint: 11.625" (295 mm);
With fully extended brass leadscrew cover: 12.375" (314 mm) - Height Overall (Max.)*: 20.75" (527 mm)
- Table size: 2.75" x 13.00" (70 x 330 mm)
- Hold-down provision: 2 T-Slots
- Shipping Weight: 30 lb. (13.6 kg)
- Movements in addition to X-, Y- and Z-axes
- Headstock rotation: (90° left/right)
- Column rotation: (90° left/right)
- Column pivot: (90° forward/back)
- Column swing: (90° left/right)
- Column travel(in/out): 5.5" (140 mm)
- Motor: 90 volt DC with electronic speed control that accepts any incoming current from 100VAC to 240 VAC, 50 Hz or 60 Hz.
- Spindle Speed Range: 70-2800 RPM continuously variable by electronic speed control
*Overall dimensions include motor and speed control
