Clutch #35 Chain, 11T with a 5/8" Bore for Go Kart or Minibike

• 5/8" Bore with integral 3/16" key
  
• 11T Driver for #35 Chain
• Bi-Directional (inboard or outboard)
  
• Clutch Fits Baja 97cc 2.8HP Doodle Bug Dirt Bit
  
• This clutch does not come with or use set screws. Clutch does not need set screws as long as the end of the crankshaft is threaded for a bolt. Most go kart clutches are held onto the shaft with a bolt and larger washer. Extra washers can be used on the crankshaft to space clutch.

**There are many variables that play into the performance of a clutch. Tire size, rear sprocket size and rear drive set-up are a few of the main variables that could affect clutch performance. If you are using large tires or a small sprocket, your vehicle may require a belt drive system. Clutch performance is not based solely on the engine size.**