The Yellow Clone engines are imported as racing engines and have a higher level of quality and tolerance control.

The Yellow Clone is shipped ready to install your accessories. No tank, no governor, no muffler and no air cleaner.

Throttle rod and springs are provided for mounting a top plate / throttle kit.

Engine Specifications

• 6.5hp
• 196cc
• Piston is .008" to .012" in the hole yielding a low 27cc combustion chamber volume - great compression
  
• Ruxing Carb with adjustable idle mixture screw* .039" butterfly and .117" throttle shaft - best flow and fuel signal
  
• High Flow Head Casting - We know which castings are good, and requested them!
  
• Sidecover bolts with serrated head flanges - won't back out from vibration
  
• Forged 2.130" Stoke Crankshaft (max stroke is 2.133") with hardened rod journal - strong, durable, powerful
  
• Chemical Resistant Crank Seals - resist leaks longer
• EPA Approved
  

Basic You-Build-It Kit includes:

• 6.5HP Dupor Engine w/o fuel tank
  
• Top plate/throttle hookup
  
• Billet air filter adaptor
  
• Choke hold
  
• Fuel pump
  
• Pulse inlet fitting
  
• Angled air filter (3-1/2" OD x 4" Tall)
  
• 5' fuel hose
  
• BIG Bertha Chain guard/heat shield
  
• "Whoopass" valve springs
  
• "615" bored and jetted carb
  
• CL1i Dyno-Cam
  (label on box says "NEW CL-1-M" which is a CL1i with a corrected lift on the exhaust lobe. The engines often have too much lift on the exhaust side, making the engine fail tech and cam was done to correct it.
• This does Not include Assembly Instructions