Vortex "Red" Racing Clutch from SMC (Two Disc)

Vortex "Red" Racing Clutch from SMC (Two Disc)

Part Number:433512R
Manufacturer's Part Number:SMC Clutches 4202
Availability:In Stock
Location: Kit
Your Price: $349.95

Choose Options

Tooth

Product Specs:

  • 3/4" Bore
  • #35 Chain
  • 2 Disc Engine Clutch
  • Vortex torsion springs for mechanical efficiency
  • SMC Roller Levers for mechanical efficiency
  • New anti-wobble sprockets
  • New lightweight drum
  • New 12 tab clutch disc
  • New high strength steel drive hub
  • Available in 12T-16T
  • Black Springs are the stock spring for this clutch
Advantages:
  • Vortex’s patented mechanism accelerates faster.
  • Vortex torsion springs are connected directly to the levers. (Not the pressure plate.)
  • This extremely efficient and precise control of levers causes Vortex clutches to lockup in a shorter distance. 
Pit side advantages:
  • Vortex springs are naturally more accurate. Blueprinting is not required.
  • RPM adjustments are simple. Just relocate spring ends into another hole.
  • RPM adjustments are fast. There are no spring heights to set.
  • RPM adjustments are precise. All six springs apply perfectly identical loads.
  • There are no air gap limitations. You get more races between rebuilds.
  • Maintenance and repairs are easy. Say ‘goodbye’ to your clutch re-builder.
5 Stars
Owner
This is great clutch, but it will not work as sold here if you are using a Predator 212 motor. The version sold by BMI comes with black springs. These provide too high a lockup rpm regardless of the adjustment holes used. The correct springs are the silver ones which can be found online or at the SMC website, www.kartclutches.com The silver springs need to be set as follows: There are six springs. Set every other spring in the first adjustment hole and the other three in the third adjustment hole. With this setup the lockup rpm is low enough so you can drive your Kart, trike, etc without the engine racing at high rpms. The clutch will break-in after a time and you may find it needs adjustment. Also, note that you can set the springs in any combination of adjustment hole positions as long as the one directly opposite is set to the same hole. You can do every other one or four and two. You can even mix springs like two blacks and four silvers. Just remember each spring must have its opposite the same color and adjustment hole. Experiment with setting till you find the one that works best for your type usage.
Did you find this helpful?  3 of 3 Found Helpful
Reviewed by: (Verified Buyer)  from Goose Creek, SC. on 10/5/2016
5/5

Related Items

Recently Viewed Items