LandMaster LM300 4x2 UTV

LandMaster LM300 4x2 UTV

Part Number:LM300
Availability:In Stock
Location: Drop, Ship,
Your Price:
On sale$4,195.00
Retail Price:$4,595.00
Your Savings:$400.00(9%)

Choose Options

Bed Options

ALERT ***This is a non-stock item, and must be shipped to BMI (part of our vendor agreement). Call ahead for lead times. ***


  • 4-stroke 265cc single cylinder Subaru engine
  • Convenient 12V electric start with recoil back-up
  • Double A-Arm adjustable front suspension and rear articulated Swing Arm suspension with adjustable quad coil over shocks back suspension both with 3" travel
  • 1.6 gallon fuel tank
  • Standard Rear Hitch Receiver
  • 48-inch width (comparable to many large ATVs) means that it can fit into the bed of a pickup truck and can navigate through narrow trails where most other wider UTVs cannot.

Product Specs

Model Number:LM300
Engine Type:4-Stroke OHC Single Cylinder
Engine Size:265cc Subaru
Fuel Consumption:20 mpg
Range:56 miles
Starting-Battery:12V Electric Ignition - 360 cca
Backup-Recoil Start:Yes
Spark Plug:NGK BR6HS
Fuel Capacity:1.6 Gal
Alternator:15 amp
Low Oil Shut Down:No
Transaxle:Gear Drive Dana-Spicer Oil-Filled Transaxle
Drive:2 Wheel Drive
Front Suspension:Double A-Arms, Adjustable Shocks, with 3” Travel
Rear Suspension:Articulated Rear Swing Arm, Quad Adjustable Shocks, with 3” Travel
Brakes:6.25” Dual Rear Drum
Front Tires:22” x 11” x 8”
Rear Tires:22” x 11” x 8”
Special Features:3pt Lap/Shoulder Belts for Driver and Passenger, 12V Auxiliary Outlet for Accessories, 35W Headlights, Polyurethane Powder Paint, 2” Rear Receiver Hitch, Dump Bed, Bench Seating, Welded steel frame
Dimensions:102.5” x 47” x 74”
Wheel Base:71”
Turning Radius:7.5’ – Inside Radius
Dry Weight:800 lbs
Shipping Weight:977 lbs
Bed Dimensions:35”L x 42”W x 11”D - Structural Foam – “Poly Bed” with stake pockets
Bed Capacity:9.25 cu.ft. /400 lbs.
Towing Capacity:1100 lbs.
Vehicle Capacity:900 lbs.
Parking Brakes:Hand Operated
Head Rest:Yes
Under Seat Storage:No

Brister's ChuckWagon: This model replaces the Chuck Wagon Model CW300.

In-Store Purchase: Not available in store.

Assembly Info: Here is a basic breakdown of what you can expect on the assembly. When you get this kart it will be unassembled in a crate.

  1. Take the unit out of the crate and sort out the parts.
  2. Put on the front and rear tires
  3. .Put on the roll cage.
  4. Install the seats.
  5. Install the steering wheel.
  6. Put in the Battery.
  7. Check all your bolts and gas up your unit.
  8. Start your unit!
  9. Assembly Time 4 - 6 Hours
Note: The actual assembly may vary, and it is always best to have a Certified Mechanic assemble your unit.
Please remember that by purchasing a vehicle from us, you are making a Factory Direct purchase and you are responsible for performing the final assembly and setup that a store or local dealer would normally perform.

Assembly typically includes un-crating and installing/checking the wheels, seats, roll bars, hooking up the fuel line, battery and lights, checking tightness of all nuts and bolts, changing oil, etc. Although we do provide some general information and Setup Guides on our website, occasionally some units may need other routine items checked/adjusted such as cleaning and adjusting the carburetor and fuel tank, checking to ensure wires are well connected, adjusting chain slack and alignment, if needed.

Since you are skipping a dealer and saving over half the price of a usual retail customer, you will need to perform the final assembly (as stated above). This will take generally 4-6 hours or more to perform depending on your product and skill level. We STRONGLY RECOMMEND that a Qualified Mechanic perform the setup of your product. We cannot refund or exchange your unit if you cannot perform these functions. By placing an order with BMI Karts you agree to these terms

Residential and Lift-Gate fees may increase shipping cost.

Related Items

Recently Viewed Items