Inferno Fury (Needle Bearing) 3/4" Bore Racing Clutch from Hilliard

Inferno Fury (Needle Bearing) 3/4" Bore Racing Clutch from Hilliard

Part Number:404620-HILL
Manufacturer's Part Number:Hilliard LD4S-FURY-HILL
Availability:In Stock
Location: 4000.05 SR.F210
Your Price: $69.95

Choose Options

Tooth
All New Fury Clutch from Hilliard Racing.

Features:
  • The clutch includes a special oil & grease shield to keep contamination off of the shoe surface.
  • Brand new heat treated sprocket to accept the needle bearing.
  • The needle bearing helps the kart roll easier through the corners and a better release of the clutch entering the corner.
  • Upgraded the inner race with a material change and heat treatment so you can get optimal performance and long life.
  • Clutches will come standard with the mounting hardware and correct spacers to quickly mount to your LO206.
  • The hardened race and spacers that come with the clutch will clamp the clutch tight to the crankshaft to minimize fretting.
  • The high performance friction lining is cleaned with brake cleaner so maintenance is a breeze.

Product Specs:

  • 3/4" Bore
  • Includes (4) White Springs & (4) Black Springs
  • Sprocket Options: #35 or #219 chain

*11T #35 DRIVE SPROCKET HAS NO BEARING, BUT DOES REQUIRE INFERNO STYLE RACE

**There are many variables that play into the performance of a clutch. Tire size, rear sprocket size and rear drive set-up are a few of the main variables that could affect clutch performance. If you are using large tires or a small sprocket, your vehicle may require a belt drive system. Clutch performance is not based soley on the engine size.**

Related Items

Recently Viewed Items