Hobbico Hot-Shot 2 Super

Hobbico Hot-Shot 2 Super

Part Number:HCAP2528
Availability:In Stock
Location: SR,
Your Price: $29.99
This is a Super Hot-Shot #2 Standard Glo-Starter with Battery Charger. This is used to heat glow plugs to start glow-powered engines.

FEATURES:
  • Proven Twist and Lock Connector ensures a secure, solid connection that won't come off, providing safer, faster starts for your model.
  • Pre-Installed Genuine Sanyo 5000 mAh battery cell
  • Included AC battery charger with hex-shaped charge end recharges the glow starter in 10 hours.
  • A Red LED glows as unit is charging.
  • Removable Red rubber socket cap prevents shorting and any dirt or dust debris from entering into the the shaft.
  • One Year Limited Warranty USA and Canada only
INCLUDES:
  • One Super Hot Shot 2 Standard Glo-Starter w/Red rubber protective cap
  • One Hot Shot #2 Glo-Starter Battery Charger
  • One Instruction/Header Card
SPECIFICATIONS:
  • Sanyo NiCd Battery: 5000mAh 1.2VAC Charger- Input: 110-120V
  • AC 60Hz (US Standard)
  • Output: 1.25V DC 500mA
  • Hot Shot- Overall Length: 4-5/8" (118mm) Shaft Length: 2-1/4" (57mm)
  • Diameter: 1-5/16" (33mm)

COMMENTS:
  • How to use: To lock onto your engine's glow plug, place the end of the Hot Shot 2 over the plug and push down. Twist the Super HotShot #2 clockwise to lock into place.
  • Charging: Before using, initial Charge should be 12 to 14 hoursSubsequent charging time is approximately 10 hours For Hot Shot #2 Standard version use HCAP2520For Hot Shot #2 Long version use HCAP2522 
  • The charger originally packaged with this Glo-Starter has a 150mAhCharge rate which requires a long time to Charge the large mAhbattery. The modeler Charges the battery initially for 24 hours.After that, 12-hour Charges each. If modeler is a regular flier, Charge twice a month for 24 hours. ***

Related Items

Recently Viewed Items