Hobbico Hot-Shot 2 Standard

Hobbico Hot-Shot 2 Standard

Part Number:HCAP2520
Availability:In Stock
Location: SR,
Your Price: $15.99
This is a Hot-Shot #2 Standard Glo-Starter with Battery Charger.This is used to heat glow plugs while starting glow-powered engines.

  • Proven Twist and Lock Connector ensures a secure, solid connection that won't come off, providing safer, faster starts for your model.
  • Pre-Installed Genuine Sanyo Sub-C battery cell. Included AC battery charger with hex-shaped charge end recharges theglow starter in 10 hours.
  • A Red LED glows when unit is Charging.
  • Removable Red rubber socket cap prevents shorting and any dirt or dust debris from entering into the the shaft.
  • One Year Limited Warranty USA and Canada only
  • One Hot Shot #2 Standard Glo-Starter w/Red rubber protective cap
  • One Hot Shot #2 Glo-Starter Battery Charger
  • One Instruction/Header Card
  • Sanyo Sub-C NiCd Battery 1500mAh, 1.2V
  • AC Charger- Input: 110-120V AC 60Hz (US Standard)
  • Output: 1.25V DC 150mA
  • Hot Shot- Overall Length: 4" (102mm) Shaft Length: 2-1/4" (57mm)
  • Diameter: 15/16" (24mm)

  • How to use: To lock onto your engine's glow plug, place the end of the Hot Shot 2 over the plug and push down. Twist the Hot Shot 2 clockwise and it locks into place. 
  • Charging: Before using, initial charge should be 12 to 14 hours Subsequent charging time is approximately 10 hours For Hot Shot #2 Long version use HCAP2522 For Super Hot Shot #2 version use HCAP2528
  • The Charger originally packaged with this Glo-Starter had a 150mAh charge rate which takes a long time to charge the large mAh battery. The customer charges the battery initially for 12 hours; 24 hours if they are regular fliers.

Related Items

Recently Viewed Items