Chain Replacement


Removal
  • 1. Remove the guards covering the drive components.
  • 2. Rotate the drive wheel to place the master link (3) in an accessible position between the two sprockets.
  • 3. Slide the retaining clip (1) of the master link (3) until the reliefs are centered over the link pins.
    Remove the clip and side plate (2).
  • 4. Slide the master link out and remove the chain.
Installation
  • 1. Install new chain.
  • 2. Slide the pin portion of the master link (3) in to each end of the chain to be connected.
  • 3. Slide the side plate (2) portion of the master link on to the pins.
  • 4. Slide the retaining clip (1) on to the pins until the clip snaps securely in to place.
Caution: The master link should be installed with the open end of the retaining clip (1) facing away from the direction of the chain rotation (4).